Industrial Gas Springs – Pull Type
GZ-40-400-V4A

Very low progression rate with FDA approval

Valve Technology, Stainless Steel
Traction force max. 5,000 N
Stroke 400 mm

Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 mm to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves.

This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many traction forces in combination with the suitable stainless steel accessories.
GZ-40-400-V4A
Valve Technology, Stainless Steel

Dimensions

GZ-40-400-V4A
Stroke400 mm
L retracted700 mm

Technical data

Traction force max. 5,000 N

Traction force 500 N to 5,000 N (extended up to 7,250 N)

Piston rod diameter Ø 28 mm

Progression Approx. 42 % to 45 %

Lifetime Approx. 2,000 m

Operating temperature range -20 °C to +80 °C

Material Outer body, Piston rod, End fittings: stainless steel (1.4404/1.4571, AISI 316L/316Ti)

Operating fluid nitrogen gas

Mounting with piston rod upwards

End position damping length Without damping. For end position damping use damping material (e.g. TUBUS or SLAB).

Positive stop External positive stop in the pulling direction provided by the customer.

End fittings

They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing.

On request

Special oils and other special options. Alternative accessories. Traction gas springs with end position damping also available on request. Other traction gas springs material 1.4404/1.4571, AISI 316L/316Ti (V4A) available on request.

General information
×

ACE Controls Inc. | Login

Already Registered? Login here.
For all first-time customers, an account is created when the first order is made.
If you have any questions please contact ebiz@ace-int.eu.