Welcome to ACE

Your specialist for damping technology

Change-over to EU Articles

Over the last years the requirements, documentation obligations and extensive material- and product testing have become more and more substantial.
That drove us to go in a new and pro-active way in the direction of an European product range.

We will conduct a change-over of the product descriptions and through this indicate the compliance of required norms, acts and guidelines in the European economic region.

Shock Absorbers and Feed Controls are produced worldwide. The quality requirements for the different economic regions are designed and monitored by the responsible local ACE subsidiaries. So far the conformity of the effective guidelines has not been represented outwardly. This is to follow from October 2010 by labelling all Shock Absorbers, Feed Controls and Safety Shock Absorbers.

The change-over will appear as follows: European catalogue items will be added with an EU in the article description The EU will always show after the stroke or the capacity description.

Examples: MC600EUMH2; MA3350EUM; CA2x2EU-3R

For you this will result in the following customer value:

• Worldwide traceable compliance with the European requirements
  
• Securing of spare parts according to EU-standards
  
• Safety on liability issues through central sales

To support you with the change-over updated CAD data, electronic catalogue, calculation program and data sheets will be available from October on. The products will be labelled from manufacturing month September 2010 (Code IB or 10244 on the product)

Thank you!

With best regards
ACE Stoßdämpfer GmbH

News

ACE presents a new damper family special for pressing tools

• A high service life and operational safety
• High force and energy absorbtion
• High effectiveness level
• Low setting behaviour
• Noise reduction
• Efficient work with higher cycle speeds
  

The innovative down holder damper made of co-polyester elastomer
results in a new solution as a damper in pressing tools and replaces
overloaded PU springs.
Sheet metal forming is increasingly taking place in the automobile and household appliance industry with faster cycling speeds.
When opening the press after the pressing process, the holding screws and therefore the actual tool are substantially protected.
The TUBUS-Special were developed for holding screws from M10 to M30.
The maximum energy absorption is between 5 Nm and 269 Nm.

Brochure